Leaders in Industrial Coating Services
From the smallest fasteners to larger pieces weighing up to 40,000 pounds.
Technical data
- Use Temperatures: -100° to 500°F
- Corrosion Resistance: Salt Spray (ASTM B117) ...up to 4,000 hrs (Nuts not frozen)
- Pencil Hardness: 5H-6H (ASTM D3363-92A)
- Kinetic Friction Coefficient: 0.06-0.08
- Thickness: nominal 0.001" (1 mil)
- Impact: 160 in. lb. (ASTM D2794-93)
- Adhesion: 5B (ASTM D3359-95)
- Dielectric Strength: 500 volts per mil
- Elongation: 35%-50%
- Tensile Strength: 4,000 psi
- Operating Pressure: Up to 100,000 psi
- Kesternich Test: Nuts not frozen after 30+ cycles (DIN 50018)
- Thread Fit: Over tapping of nuts 0.010" (Recommended)
Corrosion Resistance
| ASTM |
TEST |
DURATION |
RESULTS |
| D1308 |
Muriatic Acid 31% HCL |
24 Hours |
No Effect |
| D1308 |
Sulfuric Acid 93% H2SO4 |
24 Hours |
No Effect |
| D1308 |
Caustic Soda 50% NaOH |
24 Hours |
No Effect |
| D1308 |
Methyl Ethyl Ketone MEK |
24 Hours |
No Effect |
| B117 |
Salt Fog |
1,000 Hours |
No Effect |